Product details
GWC42A-1 single-phase fully automatic steel bar bending machine
The motor and electrical parts of this model are new models developed from our company over the years .
Main features
1. High-power single-motor drive,suitable for poor power areas.
2. The electrical, electrical and mechanical parts of the company have been repeatedly tested by the company's technical department, cooperate well and work harmoniously.
3. The electrical part is equipped with a time delay, which greatly reduces the defect of slow rotation of a single motor.
4. The motor current design is reasonable, which solves the disadvantages that the motor cannot start with low voltage for many years.
5. The working part of the mechanical part can be adjusted automatically according to the angle of the bending steel bar. Make the bending angle more accurate and standard.
6. The company can design and customize a variety of Hertz voltages according to different regions and different motors.
7. The machine runs smoothly with low noise, within 80 decibels.
Warranty
The warranty period is one year, we can provide free technical service for life.
Model |
GW42 |
GW50 |
GW50J |
Bending range |
6-40mm |
6-50mm |
6-50mm |
Bending speed |
5-10 |
10r |
10r |
Motor power |
3KW |
4KW |
4kw |
Packing size(mm) |
960×860×1060 |
1050x900x1070 |
1050x900x1070 |
Working disk diameter |
380mm |
410mm |
410mm |
NW(kgs) |
350 |
375 |
395 |
http://www.yucmachine.com/